Reverse Osmosis Systems

Commercial Reverse Osmosis Plant removes all the impurities from water making it fit for varieties of commercial activities. Installed at commercial establishments like shopping malls and hospitals, the commercial RO plants are considered as the most cost effective water treatment system. It cleans the water from contaminants and removes non essential, metals, corrosive salts and chemicals present in the water.

Pre-Treatment

• Clarification of water
• Sand filtration
• Water softening for reducing the hardness
• Water is passed through activated carbon filters
• Final removal of suspended particles using cartridge filters

Post-Treatment

• Oznonation
• Ultra-violet
• Chlorination Systems

• Voltage: 5 HP
• Duty Cycle: 12 h
• Production Capacity: 100 LPH (Liter per hour) to 100 M3 per hour
• Output TDS: 400 TDS to 45,000 TDS
• Membrane: 4 No 4040
• Dimensions: 4’ x 2’ x 4’ (l x b x h)
• Inlet Water Pressure: 7 Kg to 14 Kg
• Filter Cartridge: 3 No 20’ each
• Booster Pump: Multi Stag

The Commercial Reverse Osmosis Plants are widely used for:

• Purification of drinking water
• Dialysis
• Reef aquariums

Industrial reverse osmosis system plant is best suited for small and large scale industries. This type of reverse osmosis plant can be configured easily as per the individual requirements of output water. It produces high-quality demineralised water for various industrial applications. A systematic programme is integrated in the plant for studying the chemistry of water. Depending upon the contamination level of water, the RO plant itself selects the most suitable membrane configuration to provide a plant which gives a low water-rejection rate.

• The input stream water is first passed through Pressure sand filter Unit
• Removal of suspended matters and turbidity from water
• Filtered water is then passed through activated carbon filter
• Color, odor, chlorine, oil& grease get removed from raw water
• For removing micron sized particle, the water is then passed through micron cartridge filter
• The purified water is then stored in a storage tank with disinfection units

• 50 to 2000 Liter per Hour capacity
• Output TDS: 10-50 ppm (input water with TDS levels under 600 ppm)
• Pressure: 20 psi – 60 psi
• Free Chlorine: <.1 ppm
• Temperature: 35°F - 85°F
• PH: 5.8 – 10
• Silt Density Index: 5 (max)
• Electrical: 1/ 3 phase, 220-230/440Volts AC supply
• Turbidity: 1 NTU (max)

System Efficiency

• Percentage ionic rejection >96%
• Percent recovery 50-75%

• Effluent and wastewater purification
• Food processing industry
• Car washing
• Hydrogen production
• Fruit syrup production
• Beverage industries

The reverse osmosis water purifiers are the most reliable sources for purification of water. All these water purifiers are available in different tank capacities as per the requirement of your residential and work place. The RO water purifier is connected to a water supply and has pure water outlet and impure water outlet. In this type of RO system, the water is purified using ion exchange, filtration, reverse osmosis, carbon adsorption, or the addition of a chemical to balance the desired water conditions.

• Water from the cold water supply line is first passed through Reverse Osmosis Pre Filter unit
• Removal of sand silt, dirt and other sediments from water takes place
• The water is then passed through carbon filters where chlorine is removed from water
• After passing through chorine filter beds, the water then goes through the post filter unit
• Any remaining tastes and odors are removed from the product water by post filtration

All these RO water purifiers are widely used in homes and offices for purifying drinking water.

Reverse Osmosis Plants find wide application in many commercial establishments and industries for various applications. These RO plants is the cost effective solution for producing high quality demineralized water with low water rejection rate. All these reverse osmosis plants are available in varieties of construction like FRP, Stainless steel and MSRL. Extensively used in the food and beverage industry, pharmaceutical and electronics industries, these RO plants work on cross flow filtration method.

The process of water purification is carried out in following steps:

The feed water contains suspended particles and dissolved matter.

• The water is filtered through sand filtration
• After the filtration, the water is then passed through activated carbon beds for the removal of foul odor, color and carbon
• Hard water is softened
• Addition of scale inhibitor
• Finally the water is passed through cartridge filters for removal of left our suspended particles

• Flow Range: 50 LPH to 50,000 LPH
• Material of Construction: FRP / Stainless Steel / M.S.R.L
• Operation: Semi – automatic / Fully automatic
• Capacity: 100 LPH to 100 M3
• Output TDS: 400 TDS to 45,000 TDS

The Reverse Osmosis plant can be used in both commercial and industrial sectors.

We offers a Water Purifier for Schools which consists of Micron Bag and Cartridge Filter to remove suspended impurities, Carbon Cartridge Filter to remove organic impurities & Fluoride/ Arsenic / Iron removal filter with post treatment of UV sterilization to provide clean drinking water free from bacteria and virus.

• Systems are available for following capacities: 500 LPH, 1000 LPH, 2000 LPH, 3000 LPH, 5000 LPH

We offers a Stainless Steel Water Plant which consists of Micron Bag and Cartridge Filter to remove suspended impurities, Carbon Cartridge Filter to remove organic impurities & Fluoride/ Arsenic / Iron removal filter with post treatment of UV sterilization to provide clean drinking water free from bacteria and virus.

• Provide 99% desalination rate.
• Material: Stainless steel.
• Power: 3 kW.

Reverse Osmosis Plant in Stainless Steel 316

• Material: Stainless steel
• Voltage: 380 V
• Power: 3.5 kW

• Range: 0.2 - 2 m3/hr
• Power: 5.5 kW
• Voltage: 110/380 V

Keeping the diverse requirements of customers in mind, we are instrumental in providing FRP RO Plant. The presented product is made using quality assured component that is acquired from specialized sources of the industry in line with industry principles. Furthermore, this product is inspected against numerous quality limitations in order to make sure its quality.

• Long functional life
• Easy operation
• Smooth functioning

• Flow Range: 30 LPH to 50,000 LPH
• Material of Construction: FRP
• Operation: Semi – automatic / Fully automatic
• Capacity: 150 LPH to 150 M3
• Output TDS: 300 TDS to 45,000 TDS

Aguapuro Equipments Pvt. Ltd. offer a wide range of SS RO Plants to our clients, which is manufactured using quality grade raw material and components. Our team of experts manufacture these plants in line with the industry accepted norms of quality and standards. These RO Plants are as per the specific requirements of the end use of mineral water and applications vary from using it for treating it for safe drinking water, pharmaceutical industry and other industry where pure mineral water is the key ingredient for the manufacture of end product.

• Acquire easy fast installations
• Smooth operation
• Optimum performance

• Capacity: 1000 LPH
• Woking pressure: 10-15 bar
• Power: 5 kW